How to unlock using Blacksn0w from cydia if iPhone is already Pwned

by Rohit on November 4, 2009

Blacksn0w

Have you already jailbroken your iPhone using Pwnage and are on 5.11.07? Do you want to unlock your iPhone using Blacksn0w without having to again re-jailbreak using Blackra1n? If yes, this tutorial is exactly what you need.

1) Tap on cydia on your jailbroken iPhone.

2) Choose Manage tab on the bottom of the screen.

3) Select Sources.

4) On the top-right corner you will find edit button, select that and then tap add button. You will be asked to enter a url. Enter http://blackra1n.com and tap on add sources.

5) Cydia then updates your sources.

6) Once this is done. Tap on search at the bottom of cydia and in the search box look for Blacksn0w

Blacksn0w via Cydia

7) Install it and reboot your iPhone.

8 ) Congrats, you just unlocked your iPhone using Blacksn0w thanks to Geohot :)

Delicious
Stumble It

{ 14 comments… read them below or add one }

Prasad November 4, 2009 at 12:14 pm

I didn’t even need to reboot. Just ran blacksn0w with the AT&T SIM inside, and swapped it out with another SIM right after. I am able to make calls and send texts. So far so good.

SrikanthAV November 4, 2009 at 12:44 pm

@Prasad Glad that it worked for you :)

Sanjay November 4, 2009 at 3:41 pm

worked for me. Thanks Rohit!
Although geohot talked about another site for instructions to unlock- i have to come here – you are the best!! My vodafone SIM is now working from Delhi

STUGOK November 4, 2009 at 10:00 pm

Rohit,

Still can’t get my iphone WIFI to connect to the internet, I’ve turned on the WIFI, reset my network setting several times to no avail. Pls I need my WIFI to be on before I could jailbreak and unlock my iphone on Firmware 5.11.07 3G, os 3.1

Please, any solution other the reseting my network and turning my WIFI on because it did not work.

Rohit November 5, 2009 at 1:50 am

@Sanjay thanks for the compliment. It’s great to know that the blog is helping you out :)

Rohit November 5, 2009 at 1:53 am

@STUGOK After resetting your network it should have worked. See if this forum helps

http://modmyi.com/forums/t-mobile/690722-easy-fix-blacksn0w-wifi-problems.html

Will give you an alternative solution if possible. Gimme sometime

STUGOK November 5, 2009 at 5:38 pm

Rohit,

Thank you I have internet on my iphone now, have cydia, i think my phone is jailbroken, ran blacksn0w it searches for network, after sometimes, it still say “No Sim” but I have t-mobile sim card inside,

What else should I do?

Tom November 8, 2009 at 11:48 am

@rohit, everything works just fine after the (very simple) unlock, untill yesterday when my iphone refused to make connection to the internet. I can text, make calls.. only i cant connect to the internet… any tips or tricks for this problem?

tom November 10, 2009 at 6:57 am

wtb reaction :)

Mark January 12, 2010 at 10:22 pm

Worked straight off and now shows all main networks, fantastic.
mark

Romy March 12, 2010 at 4:26 pm

I am able to unlock my phone. I receive call but i cant make any. Whe i insert my sim card it tells me that it a different sim card is detected and to connect to iTunes. I connected and it tells me that the iphone i connected might be damaged but it works receiving calls. It is just that i cant use it really like a normal phone. PLEASE HELP ME!!

Kong March 15, 2010 at 5:49 am

Romy, I am having the same exact issue as you are.

I used Blackra1n and Snow to unlock the phone. Everything looks like it went through fine, however when I switch the att sim card out with a Tmobile sim, i have no signal to make phone calls. Any ideas for this issue out there? I have tried several times to unlock with no success. I did successfully jailbreak using BlackRa1n. I am on firmware 3.1.2.

All inputs are much appreciated.

mikeeyy April 8, 2010 at 3:57 am

wassuppp ppl , i did thiss nd everything goes fine on cydia i dl the blackra1n source and when i go to DL blacksn0w its completes the DL but stays stuck on the reloading screen !!!!! and then reboots my phone all over again

i have a custom ipsw with sn0wbreeze on 3.1.3 software 5.11.07 firmware and 6.0.2 botromm
im flippinggg outtt and i need my phone any one with helpp on thiss matterrr plzzz replyyy !!!!

Umer May 18, 2010 at 9:54 am

Hi I have an Iphone 3GS OS 3.1.3 done via pwnage tool and my firmware is 5.11.07 (kept it intact). I have an old boot loader.

The phone is jail broken however, can I unlock it using blackra1n?

BR / UMER

Leave a Comment

Previous post: How to unlock iPhone (5.11.07 baseband) using Blacksn0w for Windows/Mac

Next post: Easy Solution: If Youtube is not working after Blacksn0w unlock